Meny Lukk
  • Aerox 10mm droop blocks in attractive black and silver.

    185 kr NOK
  • MR33 presents the next generation of their Circle Droop Gauge which now includes two slightly rounded 10mm droop blocks with magnets for a nice and perfect storage solution. Simply slight the blocks into the Gauge and the magnets do the rest for you – a perfect 2 in 1 combination from MR33! The Droop Gauge offers a range from 4,0 to 6,6mm for adjusting the droop on 1:10 scale onroad cars!

  • The new MR33 ride height gauge is machined from black anodized aluminum with silver chamfered edges. The ride height can be adjusted from 2,0 – 6,1mm in 0.1mm steps. The gauge carries the famous MR33 logo and looks pretty awesome!

    165 kr NOK
  • The new MR33 Tweak Tool Station offers a clear and simple way to check the tweak on all 1:10 and 1:12 scale onroad cars! Compared to other products, the MR33 Tweak Tool Station does not rely on a water scale for measuring the chassis balance – this job is done by a ride height gauge (not included/#MR33-RHG) underneath the left and right side of the floating aluminum main part.

    Racers can clearly read out the values from the height gauge and don’t have to rely on a water scale. Using the MR33 Tweak Tool Station is very easy and with a tweak free car your laptimes on the track will be better and more consistent than before.

    The MR33 is made from black anodized aluminum with laser engraved numbers and logos!

    Note: For correct measurements and a perfect result, make sure that your setup board is perfectly flat on a straight table

  • Multi Droop Gauge & Support Blocks for 1/10, 1/12 On road

  • Utstyr for vekting av konkurransebiler. Settet viser vekt på hver av de 4 hulene slik at man kan justere hjulinnstillingene, for å få mest mulig optimal vektfordeling både mellom hjulpar, akselpar og i kryss. Dette er Bluetooth-versjonen der man må bruke sin egen smart-telefon, settet består av 4 vekter som kommuniserer med telefonen for å vise data. Hver vekt kan måle opp til 2kg.

    Spesifikasjoner:

    Maks tyngde på hver vekt: 2000gram
    Toleranse: 0.1gram
    Vekt hver vekt: 70gram
    Størrelse: 68x68x22,5mm/vekt
    1290 kr NOK
  • We found that a full shock rebuild or service was sometimes frustrating with the grease pot moving around the pit board and small components getting misplaced.

    This is our solution! A small tray in the front to hold the small components with the base also firmly holding the grease in place for hassle-free application. The rear of the base has labelled shock locations ensuring they are not mixed up and the laser cut shock rest is easily removable for transport and easy cleaning if needed.

    Specifications & Contents

    • PETG Grease & Oil Holder Base (x1)
    • Laser Cut Acrylic Shock Rest (x1)
    • Black Anodised Aluminium 40mm Post (x2)
    • Countersunk Stainless Steel Screw ‘M3x6’ (x2)
    • Low Profile Stainless Steel Screw ‘M3x6’ (x2)
    • Laminated Base Plate Stickers

    (Bearing Oil and Grease is not included.)

  • The MR33 product line has a new member: The all new “Circle Droop Gauge“! The new gauge comes in a circle design (diameter: 40mm) and will make exact droop adjustments more easy from now on. Because of its compact circle design, the full machined and black anodized aluminum part will fit perfectly under all 1:10 scale on-road cars and will not touch the chassis, bumper or wishbone anymore while adjusting the droop.
    The droop can be adjusted in 0.2mm steps from 4.0 to 6.6mm which is the perfect range for the most 1:10 scale on-road racing cars. All common 10mm Droop Blocks can be used with the new “Circle Droop Gauge”. With it`s silver chamfered edges the new product will look absolutely familiar with all the other MR33 products and will be an eye catcher on your pit table for sure. The laser engraved MR33 logo is a perfect finish on this latest product from MR33!

    140 kr NOK
  • The black and beautiful MR33 shock stand is a very helpful tool in the pits while maintaining your shocks. You can use it with almost every 1:10 scale onroad shock on the market and while wrenching, you can also carry some small parts on the tray in the lower section of the shock stand. The shock stand fits into the RIDE Air Remover as well so it is a very clever solution to have this aluminum stand on your pit table from today on! The silver chamfered edges look great and the famous “33” on the top makes it a full member of the MR33 family!

  • Muchmore have introduced their new Diff Analyzer device, a tool to measure the hardness of gear and ball differentials. The handy tool is powered by any regular USB output and it was designed to measure the hardness of 1/8th, 1/10th and 1/12th scale diffs by simply connecting the device with the diff outdrive or diff hub, locking the main or diff gear and then hitting the analyzer’s power button. The 5 digit high precision display displays the diff hardness, allowing to measure and compare hardnesses to ensure the most accurate diff action. The device measures 86x38x28.5mm, it weighs in at 84.3g and it requires an additional micro 5-pin USB cable for operation.

    1100 kr NOK
  • Coming soon from Muchmore is the Tweakmaster Ver.4 chassis tweak tool for 1/10th touring cars. The anti-tweak rod now features three holes for the antenna, motor mount post and spur gear while the anti-tweak plate is of a thinner and lighter design for easier carrying and storage. The tool, that is used to ensure the chassis, bulkhead and top deck assembly is tweak-free, comes in a protective pouch.

    650 kr NOK
  • Holder til setupstasjon

    125 kr NOK
  • RC MAKER Digital Camber Gauge for Onroad

  • Quick Camber Gauge <0.5 to 2.0 Angle 0.5step> for 1/10 Touring & F1 cars