Meny Lukk
  • MR33 brass strut and weight set for the Awesomatix A800R touring car.

    The set consists of a 25g heavy and T-shaped base plate, on which you can optionally screw an additional 10g weight.
    A clever solution from MR33, of course precisely and accurately manufactured.

    350 kr NOK
  • The weight distribution of a car is one of the most powerful setup options that most racers overlook!
    Space to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it’s possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE!

    Our MXLR Tungsten ESC Weight 20g. is designed to fit under speed controllers, especially under the light stock version esc’s from various brands. To counteract the weight of the battery it’s needed to place weight on the electronics side of the car where the space is naturally limited.
    The most efficient and performance orientated way is to put the weight under the lightweight e-components.
    This will help to get the car up to the minimum weight of given regulations at events and benefits the weight distribution. Furthermore it can be used as balance weight in other places, for example between the servo and motor.

    Round corners as well as polished top and lower surface underline the high quality of our Tungsten Weights.
    For the installation we recommend to use a thin double sided tape (0.1-0.2mm).

  • The weight distribution of a car is one of the most powerful setup options that most racers overlook!
    Space to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it’s possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE!

    Our MXLR Tungsten ESC Weight 15g. is designed to fit under speed controllers, especially under the light stock version esc’s from various brands. To counteract the weight of the battery it’s needed to place weight on the electronics side of the car where the space is naturally limited.
    The most efficient and performance orientated way is to put the weight under the lightweight e-components.
    This will help to get the car up to the minimum weight of given regulations at events and benefits the weight distribution. Furthermore it can be used as balance weight in other places, for example between the servo and motor.

    Round corners as well as polished top and lower surface underline the high quality of our Tungsten Weights.
    For the installation we recommend to use a thin double sided tape (0.1-0.2mm).

  • The weight distribution of a car is one of the most powerful setup options that most racers overlook!
    Space to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it’s possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE!

    Our MX Tungsten Receiver Weight 12g. is designed to fit under the receiver of your car, which is basically a very lightweight component. Our experience is that most cars need weight in the receiver area to achieve a well balanced weight distribution. The weight match perfectly with Sanwa RX-491 and RX-493 receivers as well as it can be used with any other receivers. Furthermore it can be used as balance weight in other places.

    Round corners as well as polished top and lower surface underline the high quality of our Tungsten Weights.
    For the installation we recommend to use a thin double sided tape (0.1-0.2mm).

    175 kr NOK
  • The weight distribution of a car is one of the most powerful setup options that most racers overlook!
    Space to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it’s possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE!

    Our MXLR Tungsten Balance Weight 10g. is the same size as the widely known 5g. tire balance weight.
    This shows the big difference in the density and the advantage by using our tungsten weights in your car.
    Double the weight at the same footprint is great opportunity to further optimize the balance and the car performance.

    Round corners as well as polished top and lower surface underline the high quality of our Tungsten Weights.
    For the installation we recommend to use a thin double sided tape (0.1-0.2mm).

    135 kr NOK
  • The weight distribution of a car is one of the most powerful setup options that most racers overlook!
    Space to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it’s possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE!

    Our MXLR Tungsten Balance Weight 5g. is very small in size to fit in nearly every area.
    The square layout is also very handy for 1/12 scale cars where the space is limited even more compared to TC cars.

    Round corners as well as polished top and lower surface underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).

  • Weight Putty [20g]