Meny Lukk
  • It’s important to keep the weight and by this the center of gravity as low as possible to achieve the best performance.
    As the wing mounts are naturally placed on a high position of the bodyshell, every gram of weight you save in this place is a performance gain.

    Our LW Wing Bolts are made of PA plastic in white/cream color.
    The material has great properties such as strength and elasticity to survive even hard crashes without damage.
    Downside of the screws = it’s rather easy to over tight the nuts and skip the thread of the screw. Please be gentle at tightening! We recommend to add a second nut (we include enough) on every screw to create a «double nut»-bonding.
    For this reason we included two nuts for every screw.

    SUPER LIGHTWEIGHT -> 2 screws + 4 nuts = 0,4 gram

    MAX-05-004 contains:
    10x M3x8 PA LW Wing Screw
    20x M3 PA LW Wing Nut

    LW Wing Bolts

    På lager

    70 kr NOK
  • Med dette verktøyet er det en lek å lage korrekte hjulbuer på din 1:10 Touring og FWD

    En mal som gjør det enkelt å sette en fin bue med en tusj, for å lettere klippe en perfekt bue.

    Verkøtyet er solid 3d printet i PLA +.

  • Med dette verktøyet er det en lek å lage korrekte hjulbuer på din 1:12.

    En mal for bakhulet og en for fremhjulet gjør det enkelt å sette en fin bue med en tusj, for å lettere klippe en perfekt bue.

    Verkøtyet er solid 3d printet i PLA +.

    Hjulbue mal 1:12

    Ikke på lager

    145 kr NOK
  • With the Magic Repair Glue from MR33, the quick repair of various things becomes child’s play.
    Especially for repairing small cracks or kinks on RC car bodies, the Magic Repair Glue is perfect.
    However, the glue can also be used to glue together parts made of plastic, carbon fiber, and other materials.

    An important property of Magic Glue is its flexibility.
    Unlike a usually very hard and brittle superglue, the Magic Glue always remains somewhat flexible.
    Therefore, it is especially for patching and repairing your car bodies the ultimate weapon.

    The glue can be applied with the enclosed glue tip very clean and neatly dosed.
    MR33`s Magic Glue has a great consistency. It is not too thin (hardly runs) and not too tough like ShoeGoo.

    Now comes the real highlight: The included, small UV lamp!
    With this lamp, the applied Magic Glue is irradiated for a few seconds (about 10 seconds, depending on the amount of glue) from about 5cm.
    The glue hardens immediately, but without losing its slight flexibility.
    A brilliant matter that you will certainly not want to miss in the future!

    Features of the MR33 Magic Repair Glues:

    • The perfect repair glue for the modeling field
    • Especially suitable for Lexan bodies
    • Due to optimal viscosity very easy to dose
    • Reclosable bottle
    • UV lamp for fast hardening of the glue
    • Convenient charging of the UV lamp via USB connection (USB-C)
    • MR33 Hardcase in cool look for safe storage
    • Made by ORCA
    • Content: 15g Magic Glue
    • Scope of delivery: Magic Glue, glue tip, UV lamp, hardcase bag

    Danger warnings:

    • The glue must always be kept out of reach of children!
    • If the eyes or mucous membranes come into contact with the glue, an immediate visit to the doctor is recommended!
    • Never look directly into the switched on UV lamp!
    • Always close the adhesive well after each application!

     

    Technical specification
    Body Shell Accessories: Body Protection / Repair

    MR33 Magic Repair Glue with

    Sendes fra fjernlager

    250 kr NOK
  • The MR33 Body Stiffener is the perfect solution for lateral stiffening of touring car bodies.
    Especially when using lightweight 0.4 or 0.5mm bodies, body stiffening has become a MUST HAVE.
    Especially on outdoor tracks, the vehicles are often exposed to strong winds, or even violent bumps.
    The unwanted «sideways folding» of the body is prevented with the MR33 Body Stiffener.

    The special feature of the MR33 Body Stiffener is the ultra-flexible material at the base center part.
    It adapts to the original shape of the body roof very easily when glued on, and prevents a change in the original shape of the roof.
    At the sides of the body, the Stiffener can be attached either with double-sided adhesive tape, or with screws.

    Weight of the MR33 Body Stiffener: approx. 1.7g

    Technical specification
    Body Shell Accessories: Body Clips, Body Protection / Repair, Mounting Systems
    165 kr NOK
  • The MR33 Body Fitting Set is a great all-in-one package for customizing 1/10th scale onroad touring cars and FWD bodies.

    The set consists of accurately fitting, 3D printed parts, and makes your life much easier when fitting bodies!

    The set includes:

    4 x Generous and strong magnets in 3D printed wrapping  for easy positioning of the body, and for marking the holes.

    1 x Pen in 3D printed part for marking the bottom cut line in heights of 7mm, 8mm, 9mm, 10mm, and 12mm

    4 x 3D printed adapter parts to screw onto the wheel axles of the vehicle.

    1 x 3D printed template with 67mm diameter to put on the adapters and to mark the wheel housings

    1 x 3D printed template with 69mm diameter to put on the adapters and to mark the wheel housings

    The exact use of the set you can watch in the ToniSport newsfeed on our Youtube channel!

    Technical specification
    Tools: Body Reamers / Magnets
    335 kr NOK
  • MR33 Body Support Foam 5mm Set 10x50x5mm (4) 10x100x5mm (4)

    The MR33 Body Support Foam Set for touring car bodies is made of thinner 2mm or thicker 5mm foam. Each set consists of a total of eight pads (on a sheet) that support the front of the body against the ram, providing improved aerodynamics and more stability.

    The foam sizes included are 10x100mm (4) and 10x50mm (4), which are all self-adhesive for easy installation.

    60 kr NOK
  • MR33 Body Support Foam 2mm Set 10x50x2mm (4) 10x100x2mm (4)

    The MR33 Body Support Foam Set for touring car bodies is made of thinner 2mm or thicker 5mm foam. Each set consists of a total of eight pads (on a sheet) that support the front of the body against the ram, providing improved aerodynamics and more stability.

    The foam sizes included are 10x100mm (4) and 10x50mm (4), which are all self-adhesive for easy installation.

    60 kr NOK
  • Bittydesign Vinyl Stencil Honeycomb Large

  • Bittydesign Vinyl Stencil Stars

  • Bittydesign Vinyl Stencil Electronic Circuit

  • Schumacher’s legendary tools. Oversized knurled handle for great grip. It won’t roll off the table. Easy identification with coloured end cap. Cool black and silver look. Incredibly sharp. Creates upto to 13mm hole size.

    245 kr NOK
  • Erstatningspen for Bittydesign Marker Line Kit

    30 kr NOK
  • Bittydesign Magnetic Body Post Marker Kit Black

    245 kr NOK