Meny Lukk
  • WOLVERINE MAX is ZooRacing’s latest high performance touring car body, whose design has been developed according to the latest findings, with the aim to make WOLVERINE MAX even faster than its predecessors on any track. Many new features ensure that the handling has become even more dynamic, with more downforce for more stability in the corners with significantly more rotation. At the same time, aerodynamic efficiency has been improved once again.

    To this end, many areas of WOLVERINE MAX have been noticeably enhanced. The overall length has been significantly shortened in favor of lower inertia and thus improved rotation around the vertical axis. To achieve even more steering in fast corners, the front and hood have been made even steeper. To better direct the lateral airflow along the rear wheel arches to the rear wing and thus create even more downforce, WOLVERINE MAX has been heavily waisted on the side. The rear end is designed to be very flat and homogeneous, ensuring a very low center of gravity on the one hand and a very even airflow to the rear wing on the other. The shape of the rear fenders has been reshaped for more uniform airflow. This has minimized turbulence at the end of the body.

    The roof of WOLVERINE MAX has been stretched more to improve overall aerodynamic efficiency. For the first time, the side windows have a camber to achieve more even pressure ratios as air flows past. For the rear wing, we used the well-known HELLCAT wing and improved it even more. The wing is known for its curved and arched design, perfectly adapted to the rear of the body, and the extreme effect that comes with it. For greater structural stability and more downforce on fast tracks, we have now added an extremely effective reinforcing rib to the rear wing.

    Especially for the 0.5mm LIGHTWEIGHT version, high stiffness is important. To achieve this, many new features have been developed. The area in front of the front window has been redesigned to provide more strength here. The front fenders now have a unique structure so that flexing at high speeds is reduced and more efficiency is achieved overall.

    At the top of the Wolverine MAX highlights is the new ZOOlite thermoforming process, which lowers the overall weight of the 0.7mm thick body by approximately 10g.

    This ensures that the body fits all regulations that currently require a minimum body weight – without giving away a single gram.

    Of course, the body is still available in the super-light 0.5mm material. If you want to get the maximum performance out of your car and are not subject to a minimum weight, this is the way to go.

    The body is available in two versions:

    REGULAR: 0.7mm thick – approx. 75g weight without paint and decals, inc. Wing

    LIGHTWEIGHT: 0.5mm thick – approx. 55g weight without paint and stickers, incl. wings

    AIRLITE: 0.4mm thick – approx. 45g weight without paint and sticker, incl. wings

    INFO:
    This body is allowed in the ETS season #16 2023/24 in the following classes (0.4mm version):
    ETS Pro Stock & ETS Modified 

    A special feature of the ZooRacing bodies are the two-stage windshield decals. With stage 1, the first step is to mask off the entire windshield and paint the body completely. After that, stage 1 is removed and the smaller stage 2 is placed in the windshield. This way you can paint a perfect window frame! Please note that you should put a white background on light-colored paints beforehand – if you want to paint a dark window frame.

    Technical data:

    • Scale: 1:10 Touring car
    • Wheelbase: approx. 257mm
    • Width: approx. 190mm

    Features:

    • developed and shaped by CAD design
    • special LCG body for low air resistance
    • deep drawn front
    • indented roof structure for perfect stability and airflow
    • Reinforcing ribs on the trunk
    • Beads and edges in the rear as an anti-tuck feature against jammed bodies
    • Wheel arches with integrated possible offset to the front or rear (+/-4mm)
    • Anti-tuck stiffening also integrated in the side panels
    • detailed decal sheet
    • two-stage windshield decals
    • Screws and nuts for rear wing included
    • EFRA homologated (EFRA 4084)
    • The delivery of the body is unpainted and not cut out.
    • Rear wing, a small decal sheet and windshield decals are included.
  • GOAT is the new high performance touring car body from ZooRacing. Developed from the experience of the super successful Dogsbollox body, but a more compact and shorter design to create more rotation for a smoother ride.

    Key areas such as the new shorter nose and hood design have been optimized and the rear end is also more compact and much lower to make cornering faster while having a stable rear end.

    The new and more pronounced rear spoiler generates more downforce, giving the car more stability on corner exit. More homogeneous airflow behind the roof reduces drag and turbulence. A new inverted fin design on the trunk reduces turbulence and increases static stability at the rear.

    The rear wing design is curved to match the body lines and has a stepped design to improve stability. The result is less flex and more downforce at high speeds.

    The GOAT body handling is less aggressive than the Wolverine and turns better than the Dogsbollox, producing a balanced side bite. Perfect for low to medium grip tracks and modified racing. The GOAT is great on all terrains!

    Add to that the ZOOlite molding process that reduces the overall weight of our 0.7mm thick standard shells by about 10g. This ensures that the standard shells are approved for all minimum weight races, while significantly lowering the overall center of gravity. In addition, the GOAT is also available in our proven Ultralight variant with 0.5 mm thickness, for those looking for maximum performance.

    With the GOAT ZooRacing introduces the new 0.4mm AIRlite material. This is by far the lightest material we have ever produced for touring car bodies. We only recommend this material for extremely grippy tracks to reduce pull rolls and/or tire wear. AIRlite material bodies are usually faster, but body life is definitely limited.

    Included is a window mask decal set, high quality wing mounting material and a detailed decal sheet with grille, headlights and taillights.

    Features:

    • CAD designed
    • Specialized LCG body with more realistic design and lower aerodynamic drag
    • Low profile yet realistic front end with sculpted hood and grille details
    • Updated Dogsbollox-style roof section for lower drag and higher cornering speeds
    • Recessed roof to channel airflow and provide significantly improved structural stability thanks to static reinforcement
    • Structured rear for anti-tucking properties
    • Large wheel arches allow the body to be moved forward or backward by 4 mm (8 mm in total)
    • Large wheel wells ensure tires do not rub in any position
    • Anti-tip capabilities with textured side skirts
    • Static reinforcement on the hood. Especially useful if you drive the ultralight version
    • ZOOlite 0.7 mm standard body weighs about 75 g (with wings)
    • 0.5 mm body weighs about 55 g in section and including wings
    • AIRlite 0.4mm weighs about 45g cut & including wing
    • Detailed decal sheet
    • Window masks
    • Mounting material for the wing
    • 100mm grid on rear truck door for easy and convenient body assembly
    • Complies with GBS rules
    Technical specification
    Onroad: Touring Car
    ETS Approved: ETS Modified / Pro Stock
    Thickness: 0,7 mm
  • GOAT is the new high performance touring car body from ZooRacing. Developed from the experience of the super successful Dogsbollox body, but a more compact and shorter design to create more rotation for a smoother ride.

    Key areas such as the new shorter nose and hood design have been optimized and the rear end is also more compact and much lower to make cornering faster while having a stable rear end.

    The new and more pronounced rear spoiler generates more downforce, giving the car more stability on corner exit. More homogeneous airflow behind the roof reduces drag and turbulence. A new inverted fin design on the trunk reduces turbulence and increases static stability at the rear.

    The rear wing design is curved to match the body lines and has a stepped design to improve stability. The result is less flex and more downforce at high speeds.

    The GOAT body handling is less aggressive than the Wolverine and turns better than the Dogsbollox, producing a balanced side bite. Perfect for low to medium grip tracks and modified racing. The GOAT is great on all terrains!

    Add to that the ZOOlite molding process that reduces the overall weight of our 0.7mm thick standard shells by about 10g. This ensures that the standard shells are approved for all minimum weight races, while significantly lowering the overall center of gravity. In addition, the GOAT is also available in our proven Ultralight variant with 0.5 mm thickness, for those looking for maximum performance.

    With the GOAT ZooRacing introduces the new 0.4mm AIRlite material. This is by far the lightest material we have ever produced for touring car bodies. We only recommend this material for extremely grippy tracks to reduce pull rolls and/or tire wear. AIRlite material bodies are usually faster, but body life is definitely limited.

    Included is a window mask decal set, high quality wing mounting material and a detailed decal sheet with grille, headlights and taillights.

    Features:

    • CAD designed
    • Specialized LCG body with more realistic design and lower aerodynamic drag
    • Low profile yet realistic front end with sculpted hood and grille details
    • Updated Dogsbollox-style roof section for lower drag and higher cornering speeds
    • Recessed roof to channel airflow and provide significantly improved structural stability thanks to static reinforcement
    • Structured rear for anti-tucking properties
    • Large wheel arches allow the body to be moved forward or backward by 4 mm (8 mm in total)
    • Large wheel wells ensure tires do not rub in any position
    • Anti-tip capabilities with textured side skirts
    • Static reinforcement on the hood. Especially useful if you drive the ultralight version
    • ZOOlite 0.7 mm standard body weighs about 75 g (with wings)
    • 0.5 mm body weighs about 55 g in section and including wings
    • AIRlite 0.4mm weighs about 45g cut & including wing
    • Detailed decal sheet
    • Window masks
    • Mounting material for the wing
    • 100mm grid on rear truck door for easy and convenient body assembly
    • Complies with GBS rules
    Technical specification
    Onroad: Touring Car
    ETS Approved: ETS Modified / Pro Stock
    Thickness: 0,7 mm
  • GOAT is the new high performance touring car body from ZooRacing. Developed from the experience of the super successful Dogsbollox body, but a more compact and shorter design to create more rotation for a smoother ride.

    Key areas such as the new shorter nose and hood design have been optimized and the rear end is also more compact and much lower to make cornering faster while having a stable rear end.

    The new and more pronounced rear spoiler generates more downforce, giving the car more stability on corner exit. More homogeneous airflow behind the roof reduces drag and turbulence. A new inverted fin design on the trunk reduces turbulence and increases static stability at the rear.

    The rear wing design is curved to match the body lines and has a stepped design to improve stability. The result is less flex and more downforce at high speeds.

    The GOAT body handling is less aggressive than the Wolverine and turns better than the Dogsbollox, producing a balanced side bite. Perfect for low to medium grip tracks and modified racing. The GOAT is great on all terrains!

    Add to that the ZOOlite molding process that reduces the overall weight of our 0.7mm thick standard shells by about 10g. This ensures that the standard shells are approved for all minimum weight races, while significantly lowering the overall center of gravity. In addition, the GOAT is also available in our proven Ultralight variant with 0.5 mm thickness, for those looking for maximum performance.

    With the GOAT ZooRacing introduces the new 0.4mm AIRlite material. This is by far the lightest material we have ever produced for touring car bodies. We only recommend this material for extremely grippy tracks to reduce pull rolls and/or tire wear. AIRlite material bodies are usually faster, but body life is definitely limited.

    Included is a window mask decal set, high quality wing mounting material and a detailed decal sheet with grille, headlights and taillights.

    Features:

    • CAD designed
    • Specialized LCG body with more realistic design and lower aerodynamic drag
    • Low profile yet realistic front end with sculpted hood and grille details
    • Updated Dogsbollox-style roof section for lower drag and higher cornering speeds
    • Recessed roof to channel airflow and provide significantly improved structural stability thanks to static reinforcement
    • Structured rear for anti-tucking properties
    • Large wheel arches allow the body to be moved forward or backward by 4 mm (8 mm in total)
    • Large wheel wells ensure tires do not rub in any position
    • Anti-tip capabilities with textured side skirts
    • Static reinforcement on the hood. Especially useful if you drive the ultralight version
    • ZOOlite 0.7 mm standard body weighs about 75 g (with wings)
    • 0.5 mm body weighs about 55 g in section and including wings
    • AIRlite 0.4mm weighs about 45g cut & including wing
    • Detailed decal sheet
    • Window masks
    • Mounting material for the wing
    • 100mm grid on rear truck door for easy and convenient body assembly
    • Complies with GBS rules
    Technical specification
    Onroad: Touring Car
    ETS Approved: ETS Modified / Pro Stock
    Thickness: 0,7 mm
    360 kr NOK
  • Bittydesign Eptron 1:10 Touring Car Clear Body 190mm (clear) – Ultra Lite

    Bittydesign starts the year 2023 with the presentation of the new Eptron 1:10 touring car body.

    It is the successor of the Hyper-HR body and has been revised again in all important details.

    The body is delivered including disc masks, decal sheet, and screws for mounting the rear wing.

    Available in 2 variants:

    BDTC-190ETR B ittydesign Eptron body 190mm Lightweight (0,7mm)

    BDTC-190ETRULT Bittydesign Eptron body 190mm Ultra-Lite weight (0,5mm)

    325 kr NOK
  • The P63 is the latest aerodynamic solution from PROTOform for the 1:10 touring car class and the year 2022.

    This aerodynamic body, with a very high downforce and a low center of gravity, was developed together with professional racers.
    It is tailored for today’s insanely fast 190mm touring cars.
    The P63 is packed with updated features for outstanding performance on the track and easy installation on any 1/10th scale touring car.

    Features of the PROTOform P63:

    • Radical design with high downforce, sloped hood and forward-mounted cab
    • Stiffening hood ribs for low deflection with ultra-light weights
    • Recessed trunk section for low center of gravity and added rigidity
    • Molded side door panels for increased side bite
    • Better airflow behind the bumper for reduced drag

    The P63 also offers the easiest assembly of any PROTOform body to date.
    PROTOform’s signature mounting markings in the front wheel wells are back, allowing you to choose the position of the body in 2mm increments up to +8mm.
    Additionally, there are markings on the hood, tailgate, and rear bumper to easily align the body posts no matter which chassis or rear body post configuration (vertical or horizontal) you prefer.

    This body conforms to Global Body Spec rules and is made in the USA from high quality, durable polycarbonate.

    290 kr NOK
  • The P63 is the latest aerodynamic solution from PROTOform for the 1:10 touring car class and the year 2022.

    This aerodynamic body, with a very high downforce and a low center of gravity, was developed together with professional racers.
    It is tailored for today’s insanely fast 190mm touring cars.
    The P63 is packed with updated features for outstanding performance on the track and easy installation on any 1/10th scale touring car.

    Features of the PROTOform P63:

    • Radical design with high downforce, sloped hood and forward-mounted cab
    • Stiffening hood ribs for low deflection with ultra-light weights
    • Recessed trunk section for low center of gravity and added rigidity
    • Molded side door panels for increased side bite
    • Better airflow behind the bumper for reduced drag

    The P63 also offers the easiest assembly of any PROTOform body to date.
    PROTOform’s signature mounting markings in the front wheel wells are back, allowing you to choose the position of the body in 2mm increments up to +8mm.
    Additionally, there are markings on the hood, tailgate, and rear bumper to easily align the body posts no matter which chassis or rear body post configuration (vertical or horizontal) you prefer.

    This body conforms to Global Body Spec rules and is made in the USA from high quality, durable polycarbonate.

    290 kr NOK
  • WOLVERINE MAX 190mm touring car body

    WOLVERINE MAX is ZooRacing’s newest high-performance body on the market. It’s been designed with our newest insights in mind to make WOLVERINE MAX even faster on every track, compared to its predecessors. Lots of new features improved the handling, making it more dynamic. More contact pressure offers more stability in corners with lots more rotation. The aerodynamic efficiency has been improved again as well.

    For this purpose, we’ve advanced lots of areas of WOLVERINE MAX noticeable. The overall length has been shortened to achieve a lesser inertia and therefore a better rotation around the vertical axis. For more steering in fast corners we’ve redesigned the front and hood and made them steeper. To easier steer the airflow along the sides over the rear wheel arches to the rear wing, to create more downforce, we’ve tailored WOLVERINE MAX´s sides a lot. The rear is designed very even and uniform for a low center of gravity and to ensure an easy airflow to the wing. For a consistent flow we’ve remodeled the rear fenders to minimize turbulences at the rear of the body.

    For a better aerodynamic efficiency we’ve elongated the roof of WOLVERINE MAX. For the first time the windows at the side have an arch build in, to even out the pressure ratio of the airflow. With the rear wing we’ve included a know one, the HELLCAT wing, and improved it even further. The wing is known for its bowed form, which fits perfectly on the bodies rear and has an extreme impact. For more structural stability and more downforce on fast tracks, we’ve included a highly efficient reinforcement rib.

    Especially the 0,5mm ultralight version needs a high rigidity. To achieve that we’ve created many new features. We’ve redesigned the area in front of the window shield to create more stiffness. The front fenders got a unique structure build in to prevent deflection at high speeds and accomplish overall more efficiency.

    On top of that all is the ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, such as the ETS, while significantly lowering the overall center of gravity. In addition, WOLVERINE MAX is also available in our proven, lightweight 0.5mm variant for everyone looking for the outmost of performance.

    Part of the package are also the revolutionary 2-step window masks that will ensure window frames of Pro quality. In a first step all windows are masked using the Step 1 masks. After the painting of the body is completed, the masks will be removed and replaced by the slightly smaller Step 2 masks that leave the window frames exposed and ready to be painted in your favourite colour. The result is highly precise without the need to pre-cut or in-body-cut the window masks, ensuring greater satisfaction and less chances of creating predetermined breaking points. The body package is rounded out by high-quality wing mounting hardware and a detailed sticker sheet including grille, head and taillights.

    Features:

    – CAD designed
    – Specialized LCG body shell with a more realistic design and less aerodynamic drag
    – Low, and yet realistic front end with sculptured hood and grille details
    – Updated DBX-style roof section for less aerodynamic drag and higher cornering speeds
    – Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement
    – Structured rear end for anti-tuck capabilities
    – Large wheel arches allow the body to be placed 4mm front or back (8mm in total)
    – Large wheel arches ensure the tires will not rub in whatever position
    – Anti-tuck capabilities with structured side skirts
    – Static reinforcement on the hood. Especially useful when running the ultra lightweight variant
    – 0.5mm ultralight body weighs in at about 55g cut & including wing
    – ZOOlite 0.7mm standard body weighs in at about 75g cut & including wing
    – Detailed decal sheet
    – 2-step window masks
    – Wing mounting hardware
    – 100mm grid on the rear truck lid for easy and convenient body mounting
    – EFRA and IFMAR approved

  • WOLVERINE MAX 190mm touring car body

    WOLVERINE MAX is ZooRacing’s newest high-performance body on the market. It’s been designed with our newest insights in mind to make WOLVERINE MAX even faster on every track, compared to its predecessors. Lots of new features improved the handling, making it more dynamic. More contact pressure offers more stability in corners with lots more rotation. The aerodynamic efficiency has been improved again as well.

    For this purpose, we’ve advanced lots of areas of WOLVERINE MAX noticeable. The overall length has been shortened to achieve a lesser inertia and therefore a better rotation around the vertical axis. For more steering in fast corners we’ve redesigned the front and hood and made them steeper. To easier steer the airflow along the sides over the rear wheel arches to the rear wing, to create more downforce, we’ve tailored WOLVERINE MAX´s sides a lot. The rear is designed very even and uniform for a low center of gravity and to ensure an easy airflow to the wing. For a consistent flow we’ve remodeled the rear fenders to minimize turbulences at the rear of the body.

    For a better aerodynamic efficiency we’ve elongated the roof of WOLVERINE MAX. For the first time the windows at the side have an arch build in, to even out the pressure ratio of the airflow. With the rear wing we’ve included a know one, the HELLCAT wing, and improved it even further. The wing is known for its bowed form, which fits perfectly on the bodies rear and has an extreme impact. For more structural stability and more downforce on fast tracks, we’ve included a highly efficient reinforcement rib.

    Especially the 0,5mm ultralight version needs a high rigidity. To achieve that we’ve created many new features. We’ve redesigned the area in front of the window shield to create more stiffness. The front fenders got a unique structure build in to prevent deflection at high speeds and accomplish overall more efficiency.

    On top of that all is the ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, such as the ETS, while significantly lowering the overall center of gravity. In addition, WOLVERINE MAX is also available in our proven, lightweight 0.5mm variant for everyone looking for the outmost of performance.

    Part of the package are also the revolutionary 2-step window masks that will ensure window frames of Pro quality. In a first step all windows are masked using the Step 1 masks. After the painting of the body is completed, the masks will be removed and replaced by the slightly smaller Step 2 masks that leave the window frames exposed and ready to be painted in your favourite colour. The result is highly precise without the need to pre-cut or in-body-cut the window masks, ensuring greater satisfaction and less chances of creating predetermined breaking points. The body package is rounded out by high-quality wing mounting hardware and a detailed sticker sheet including grille, head and taillights.

    Features:

    – CAD designed
    – Specialized LCG body shell with a more realistic design and less aerodynamic drag
    – Low, and yet realistic front end with sculptured hood and grille details
    – Updated DBX-style roof section for less aerodynamic drag and higher cornering speeds
    – Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement
    – Structured rear end for anti-tuck capabilities
    – Large wheel arches allow the body to be placed 4mm front or back (8mm in total)
    – Large wheel arches ensure the tires will not rub in whatever position
    – Anti-tuck capabilities with structured side skirts
    – Static reinforcement on the hood. Especially useful when running the ultra lightweight variant
    – 0.5mm ultralight body weighs in at about 55g cut & including wing
    – ZOOlite 0.7mm standard body weighs in at about 75g cut & including wing
    – Detailed decal sheet
    – 2-step window masks
    – Wing mounting hardware
    – 100mm grid on the rear truck lid for easy and convenient body mounting
    – EFRA and IFMAR approved

  • ANTI 190mm touring car body

    ANTI is ZooRacing´s new high-performance touring car body. Developed from the experience with the super successful Wolverine body, but with more overall downforce and a more stable rear in mind.

    Key areas, like a super low nose, a more steep bonnet and arch-designed side windows were carefully optimized. The main body has a more wedge design to improve the airflow to the rear and creates a lot more downforce.

    For a more fluent handling, the ANTI has a little more stretched cabin. The more homogeneous airflow behind the roof reduces drag and turbulences. New inverted fin design on the  trunk reduces turbulences and increases static stability at the rear section and results a better approach flow to the new designed rear wing.

    The rear wing design is curved according the body lines and has a step/fin design to improve stability. The result is less flex and more downforce on high speeds.

    The handling with the ANTI body is less agressive, than the Wolverine and allows a lot more overall stability. Especially at corner exits it´s less critcal to drive and gives more trust and confidence when accelerating. Perfect for modified racing, where downforce is needed and stock racing for all, who are looking for a less agressive body, than the Wolverine.

    On top of that all is the ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, while significantly lowering the overall center of gravity. In addition, ANTI is also available in our proven, lightweight 0.5mm variant for everyone looking for the outmost of performance.

    Part of the package are also the revolutionary 2-step window masks that will ensure window frames of Pro quality. In a first step all windows are masked using the Step 1 masks. After the painting of the body is completed, the masks will be removed and replaced by the slightly smaller Step 2 masks that leave the window frames exposed and ready to be painted in your favourite colour. The result is highly precise without the need to pre-cut or in-body-cut the window masks, ensuring greater satisfaction and less chances of creating predetermined breaking points. The body package is rounded out by high-quality wing mounting hardware and a detailed sticker sheet including grille, head and taillights.

    Features:

    – CAD designed
    – Specialized LCG body shell with a more realistic design and less aerodynamic drag
    – Low, and yet realistic front end with sculptured hood and grille details
    – Updated Wolverine-style roof section for less aerodynamic drag and higher cornering speeds
    – Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement
    – Structured rear end for anti-tuck capabilities
    – Large wheel arches allow the body to be placed 4mm front or back (8mm in total)
    – Large wheel arches ensure the tires will not rub in whatever position
    – Anti-tuck capabilities with structured side skirts
    – Static reinforcement on the hood. Especially useful when running the ultra lightweight variant
    – 0.5mm ultralight body weighs in at about 55g cut & including wing
    – ZOOlite 0.7mm standard body weighs in at about 75g cut & including wing
    – Detailed decal sheet
    – 2-step window masks
    – Wing mounting hardware
    – 100mm grid on the rear truck lid for easy and convenient body mounting
    – Designed to meet GBS rules

    – EFRA/IFMAR approved for 2022

  • ZooRacing 3-piece 190mm Touring Car Wing Set

    ZooRacing have announced the release of their new 3-piece wing set that includes three different design wings to fine-tune the aerodynamics of most of today’s 1/10th scale 190mm touring car bodies. Included are the wing of the ultra-popular DBX/PreoPard/ZooZilla series, the highly-curved HellCat rear wing as well as the new BayBee rear wing, all moulded from high-quality polycarbonate.

    Also included are a total of six polycarbonate endplates. Using the set comes in handy especially when running ZooRacing’s ultra lightweight 0.5mm bodies that greatly profit from the tougher and less flexible rear wings as they improve overall downforce without adding too much weight. In addition the different shapes of the wings allow to fine-tune the aerodynamic balance if conditions call for it.

    The wing set is usable with all 190mm touring cars that use a 100mm wing post spacing – being it originals or rip-offs.

  • The BAYBEE body shell for 190mm touring cars is ZooRacing’s latest high performance touring car lid. It is basically an evolution of the ultra-popular DBX with a comparable roof line and design, however the slightly stretched roof reduces aerodynamic drag, resulting in higher corning speeds, something especially stock class racers will be looking for. New for the BAYBEE is also a longer and rounder front end shape for increased corner speeds under power, allowing for precise handling especially in larger corners while reducing tyre scrub at the same time which further helps to maintain high speeds and smooth cornering. All this comes without sacrificing low-speed steering with the BAYBEE offering razor-sharp steering response in technical parts of the track. Compared to the already low-profile appearance of the DBX, the BAYBEE features a once more lowered shoulder line, hood and trunk section allowing to substantially to mount the body lower on the chassis, resulting in a once more lowered overall centre of gravity.

    Part of the package is also a redesigned High Efficient rear wing that is of a curved design, following the new rear end shape which results in an even more efficient air flow between body shell and wing. Other aerodynamic features include redesigned side skirts for optimised airflow and further improved stability while reinforcement ribbings on the trunk ensure best possible rigidity even under heavy loads as they occur in today’s modified class racing. Last but not least comes the realistic front end design that not only makes for a cool new look but the sculptured hood design is also meant to improve airflow and overall stability and durability of the body shell.

    On top of that all is the new ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, such as the ETS, while significantly lowering the overall centre of gravity. In addition the BAYBEE is also available in our proven, lightweight 0.5mm variant for everyone looking for the utmost of performance.

    Part of the package are also the revolutionary 2-step window masks that will ensure window frames of Pro quality. In a first step all windows are masked using the Step 1 masks. After the painting of the body is completed, the masks will be removed and replaced by the slightly smaller Step 2 masks that leave the window frames exposed and ready to be painted in your favourite colour. The result is highly precise without the need to pre-cut or in-body-cut the window masks, ensuring greater satisfaction and less chances of creating predetermined breaking points. The body package is rounded out by high-quality wing mounting hardware and a detailed sticker sheet including grille, head and tail lights.

    Features:

    – CAD designed
    – Specialised LCG body shell with a more realistic design and less aerodynamic drag
    – Long, low, and yet realistic front end with sculptured hood and grille details
    – Updated DBX-style roof section for less aerodynamic drag and higher cornering speeds
    – Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement
    – Reinforcement ribs on the trunk
    – Structured rear end for anti-tuck capabilities
    – Large wheel arches allow the body to be placed 4mm front or back (8mm in total)
    – Large wheel arches ensure the tyres will not rub in whatever position
    – Anti-tuck capabilities with structured side skirts
    – Static reinforcement on the hood. Especially useful when running the ultra lightweight variant
    – 0.5mm ultralight body weighs in at about 55g cut & including wing
    – ZOOlite 0.7mm standard body weighs in at about 75g cut & including wing
    – Detailed decal sheet
    – 2-step window masks
    – Wing mounting hardware
    – 100mm grid on the rear truck lid for easy and convenient body mounting
    – Designed to meed GBS rules
    – EFRA approved

  • Features:
    – CAD designed
    – Specialised high downforce/high efficiency body shell
    – Aggressive steering, high overall downforce for quick cornering especially in 13.5T Pro Stock and Modified racing classes and when running in medium to high-grip conditions
    – 10mm forward-placed front end and cabin for aggressive steering and improved rear end grip
    – Curved trunk section and rear wing for optimised rear stability and aerodynamics
    – Structured rear end for anti-tuck capabilities
    – Large wheel arches allow the body to be placed 4mm front or back (8mm in total)
    – Large wheel arches ensure the tyres will not rub in whatever position
    – Anti-tuck capabilities with structured side skirts
    – Static reinforcement on the hood. Especially useful when running the ultra lightweight variant
    – 0.5mm ultralight body weighs in at about 55g cut & including wing
    – 0.7mm standard body weighs in at about 83g cut & including wing
    – Detailed decal sheet
    – 2-step window masks
    – Wing mounting hardware
    – 100mm grid on the rear truck lid for easy and convenient body mounting
    – Designed to meed GBS rules

  • Mon-tech’s answer to the increasingly changing trends in the Touring Car market. Lower centre of gravity, more aggressive styling. This version is the light weight version. Supplied clear with all necessary hardware. 190mm width.

  • The DogsBollox body shell for 190mm touring cars is ZooRacing’s third touring car body shell. Developed as an outright low centre of gravity body the lid features a 6mm lower trunk section – including the rear wing – for greater corning speeds, a more agile handling and less weight distribution changes. In addition to the low rear end the body also offers a super low front end which further adds to the aggressive LCG aero package. When run on high to very high-grip surfaces drivers will experience a lot less traction rolling issues even when using the body in the new 90g ETS weight rule configuration.