Cool looking small alloy servo mounts for GT12 or 1/12th scale sized servo’s. Black anodised with all mounting hardware included for a more secure fixing over plastic versions.

The diff nut clamp replaces the M3 nyloc diff tension nut. This allows the diff tension to be adjusted
by removing only the right hand wheel.

Adjustment is then achieved by simply loosening the locking grub screw and holding the 1.5mm driver in place at the same time as turning the left wheel/other side of the diff.

Finally, tighten the locking grub screw and put the wheel back on.

Front ride height spaces for the Icon from Montech.

0.5mm stainless steel.