Beskrivelse
Wheel Front 4WD – White – 5pr
Wheel Fitting – Hex – 12mm
260 kr NOK
Wheel Front 4WD – White – 5pr
Sendes fra fjernlager
Wheel Front 4WD – White – 5pr
Wheel Fitting – Hex – 12mm
Vekt | 200 g |
---|
Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.
These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment between springs is very small, allowing fine adjustment of the suspension.
– Constant Wire Diameter
– Close Rate Increment
– Easy Identification
– Black Coated
– Precision Ground Ends
– Available as pairs or tuning sets of 7 pairs.
To enable the Big Bore Springs to be used on small bore shocks we have release 2 optional converters for the top of the spring, enabling better seating of the spring. The bottom of the spring fits regular small bore shock bottoms. CR190 and CR191
Click to view larger chart.
Made in house from 3mm carbon fiber to fit all popular buggies on the market! This one fits the CAT L1 EVO. These will drastically increase the life of your wing! We started from scratch with a new 3 step design, internal relief and counter bored screw holes.
Alloy case gives super precision and strength and has a larger oil volume for more consistency during a run. Main large shim also thicker for more reliability.
Builds a complete diff with all parts necessary included.
U7979 is the conversion if you already have the diff parts.