Meny Lukk

V-Made Ball Diff Grease

40 kr NOK

V-Made Ball Diff Grease

På lager

Varenummer: CHE-VDG Kategori:
Muchmore

Beskrivelse

V-Made Ball Diff Grease

For Ball differential’s plates and ball.
Hold tight between balls and plates.
Ensures exact diff actions.
Provides consistent performance under any weather conditio

Tilleggsinformasjon

Vekt 15 g

Brand

Muchmore

Omtaler

Det er ingen omtaler ennå.

Bli den første til å omtale “V-Made Ball Diff Grease”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *

Relaterte produkter

  • Driveshaft & Gears oil

    På lager

    95 kr NOK

    Driveshafts and Gears are under high load, which means at the same time this components are exposed to high wear.
    It’s our goal to minimize the wear without influence of free movement.

    Together with a special oil manufacturer in Germany we developed the MXLR Driveshaft & Gears Oil.
    It consists of well chosen high quality ingredients in a special mixture to reduce wear and stay in place under rotation. For this reason, the oil is very thick and sticky!
    There is still the chance that some oil will «fly away» at high RPM’s – BUT another special ingredient of our mixture will ensure an ongoing lubrication.

    We recommend to check and service your driveshafts once a day at race/test sessions and add 1-2 drops per shaft.
    Our proven 10ml bottle with included metal tip allow an easy maintenance of your RC model to keep it in best shape and on the highest performance level.

    Kjøp

  • V-Made Thrust Grease

    På lager

    60 kr NOK

    V-Made Thrust Grease

    ● Features of V-Made Thrust Grease (5g)
    For thrust plates and balls of ball differential units.
    Provides smooth and exact rotation. Prolongs thrust bearing’s life time.
    The most suitable sticky viscosity has been applied.

    Kjøp

  • Low Friction Grease (4g)

    På lager

    85 kr NOK

    Our Low Friction Grease has proven to be excellent in minimising wear in dry conditions but also for wet due to how it adheres to metallic surfaces. This also prevents the frustrating issue that most greases have which is the distribution over the car when first applied and run. During a run, the viscosity of our grease will decrease, allowing the grease to flow into the tighter spaces on a CVD, increasing the life of the subassembly due to the increased surface area coverage.

    Specifications & Contents

    • 4g of grease.
    • 5ml Plastic Pot.

    Additional Information 

    1. Remove all dirt and grease from the joint or surface.
    2. Clean surface with brake cleaner (Or Similar).
    3. Apply a thin layer of grease to the surface using a clean driver.
    4. Work into the joint and wipe off excess grease.
    Kjøp