Beskrivelse
Stainless Pro Body Clips Large (10pcs.) For 1/8 biler
30 kr NOK
Stainless Pro Body Clips Large (10pcs.)
På lager
Stainless Pro Body Clips Large (10pcs.) For 1/8 biler
Vekt | 14 g |
---|
På lager
Our bodyshell stiffeners reduce the chance of a body tuck. They add very little weight (2.7g Mounted) for the strength gained on the rear bumper and wheel arch due to their lightweight effective design. Each type is designed at a different angle to fit the line of most 200mm and 190mm bodyshells, see ‘Selecting Your Bodyshell Stiffener’ below. They are perfect for any racer looking for a lightweight solution to reduce the chance of a body tuck during a run or even worse, the main finals.
Specifications & Contents
Selecting Your Bodyshell Stiffener
Zoo Racing
Preopard (Type 4) – DBX (Type 3) – Hellcat (Type 4) – Baybee (Type 2)
Protoform
Tourismo (Type 4) – LTC 1 (Type 2) – P47 (Type 1)
Bittydesign
Extreme
Twister (Type 3) –
Montech
YSOT (Type 4) –
MR33 Body Support Foam 2mm Set 10x50x2mm (4) 10x100x2mm (4)
The MR33 Body Support Foam Set for touring car bodies is made of thinner 2mm or thicker 5mm foam. Each set consists of a total of eight pads (on a sheet) that support the front of the body against the ram, providing improved aerodynamics and more stability.
The foam sizes included are 10x100mm (4) and 10x50mm (4), which are all self-adhesive for easy installation.
Ikke på lager
We’ve all been there before. Hours of preparation, countless practice laps, flawless qualifying runs and at last you’ve reached the moment of truth: the finals. In an instant, a simple tap or swipe across the rear bumper from a fellow racer ends your podium hopes. The dreaded body tuck.
PROTOform has developed Anti-Tuck Body Stiffeners to help remedy this frustrating problem. Made from super-stiff lexan®, the one-piece stiffener fastens inside the rear of your 190mm touring car body with three simple screws & nuts. The pieces are custom formed to fit the curvature of the lower rear fenders for a perfect fit. Not only will this system virtually eliminate body tuck, but the added rigidity will also aid unwanted fluttering or deflection of the rear of the race body at high speeds. Weighing in at only 4.5 grams, changing the weight bias or center of gravity of your car is minimized. Each set comes with two Anti-Tuck Body Stiffeners, mounting hardware and a PROTOform decal sheet.
Say goodbye to body tuck with PROTOform Anti-Tuck Body Stiffeners.
Omtaler
Det er ingen omtaler ennå.