Slipper Spring – SVR,KR,K1/Aero,L1/Evo

Relaterte produkter

• 

  Quick View

  CAT L1 EVO

  Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.

  These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment between springs is very small, allowing fine adjustment of the suspension.

  – Constant Wire Diameter
  – Close Rate Increment
  – Easy Identification
  – Black Coated
  – Precision Ground Ends
  – Available as pairs or tuning sets of 7 pairs.

  To enable the Big Bore Springs to be used on small bore shocks we have release 2 optional converters for the top of the spring, enabling better seating of the spring. The bottom of the spring fits regular small bore shock bottoms. CR190 and CR191

  Click to view larger chart.

  

  Big Bore Spring; Long Orange – 2.8 pr

  Sendes fra fjernlager

  55 kr NOK

  Legg i handlekurv
• 

  Quick View

  CAT L1 EVO

  Made in house from 3mm carbon fiber to fit all popular buggies on the market! This one fits the CAT L1 EVO.  These will drastically increase the life of your wing! We started from scratch with a new 3 step design, internal relief and counter bored screw holes.

  Klinik RC Wing Saver Buttons – Schevo

  Sendes fra fjernlager

  115 kr NOK

  Legg i handlekurv
• 

  Quick View

  Skruer

  Details! Bling up those shock caps! You might start running your shocks with the screws out now, these also fit many hinge pin applications as well as shock piston screws. Double check with your manual.

  2.5mm x 4mm fit:

  Schumacher

  TLR

  KLINIK RC 2.5 x 4mm Ti Shock Cap Screws (4)

  Sendes fra fjernlager

  70 kr NOK

  Legg i handlekurv