C/F Side Link Mount – Icon (pr)

Relaterte produkter

• 

  Quick View

  Icon

  The diff nut clamp replaces the M3 nyloc diff tension nut. This allows the diff tension to be adjusted
  by removing only the right hand wheel.

  Adjustment is then achieved by simply loosening the locking grub screw and holding the 1.5mm driver in place at the same time as turning the left wheel/other side of the diff.

  Finally, tighten the locking grub screw and put the wheel back on.

  Diff Clamp Nut – Icons

  Sendes fra fjernlager

  35 kr NOK

  Legg til i handlekurv
• 

  Quick View

  Skruer

  Titanium Button Head Hex Screws M3 x 12 pk10

  Sendes fra fjernlager

  70 kr NOK

  Legg til i handlekurv
• 

  Quick View

  Skruer

  This ICON thread insert kit includes everything needed to replace the M4 nuts with easier to use M4 thread inserts.

  -This greatly improves the security, ease of fitting and removing the front wing.

  -The wing can be fitted with both screws when using the U8123 narrow width option.

  Requires drill or 7mm nut driver handle to drill hole in wing.

  Wing Thread Insert Kit – Icon

  Sendes fra fjernlager

  45 kr NOK

  Legg til i handlekurv