-
Better Edge Sanding Drum
Ikke på lager
265 kr NOKIntroducing a brand new product line from PROTOform: the Better Edge System. For every r/c enthusiast that takes pride in finishing off their concours-worthy race body, these products are for you.
The Better Edge sanding drum is our first product in this line. There has never been a product specifically made for r/c racers to finish off the perfect wheel-well. With the use of your handheld rotary tool, the Better Edge Sanding Drum will smooth out all of the imperfections left from cutting your lexan body with scissors. At 1.5” in diameter, it’s suitable for use on many scales of body: from 1:12 scale on up to 1:8 or even off-road bodies.
The drum’s red and black anodized aluminum finish and laser-etched PROTOform logos give it a trick look on your pit table. Each pre-assembled kit comes with a replaceable high-grade silicon carbide spiral sanding band, rubber anti-slip o-rings and a mandrel made from durable tool steel to prevent damage from your rotary tool’s chuck.
Give your r/c race body a better edge!
-
70 kr NOKEkstra papir til slipekloss for karrosserier
-
110 kr NOKWe’ve all been there before. Hours of preparation, countless practice laps, flawless qualifying runs and at last you’ve reached the moment of truth: the finals. In an instant, a simple tap or swipe across the rear bumper from a fellow racer ends your podium hopes. The dreaded body tuck.
PROTOform has developed Anti-Tuck Body Stiffeners to help remedy this frustrating problem. Made from super-stiff lexan®, the one-piece stiffener fastens inside the rear of your 190mm touring car body with three simple screws & nuts. The pieces are custom formed to fit the curvature of the lower rear fenders for a perfect fit. Not only will this system virtually eliminate body tuck, but the added rigidity will also aid unwanted fluttering or deflection of the rear of the race body at high speeds. Weighing in at only 4.5 grams, changing the weight bias or center of gravity of your car is minimized. Each set comes with two Anti-Tuck Body Stiffeners, mounting hardware and a PROTOform decal sheet.
Say goodbye to body tuck with PROTOform Anti-Tuck Body Stiffeners.
-
Protoform AMR 1:12 Karosseri Pro Lightweight
Ikke på lager
225 kr NOKThe ever popular 1/12th On-Road class is definitely a favorite with R/C racers and enthusiasts the world over. It has continued to evolve and grow in recent years, much to the delight of many. PROTOform has a long history of designing winning bodies for the ultra quick and nimble 1/12th On-Road class – with numerous ROAR Nationals, US Indoor Champs, Snowbird Nationals as well as IFMAR WORLDs titles on its resume. The all-new AMR-12 race body will prove to be a step forward, in appearance and speed.
On Oct 1, 2009 there will be new ERFA/BRCA body rules that will come into effect, so a clean sheet type design was required by PROTOform in an effort to fully comply. The AMR-12 had been exhaustively tested in preparation for these rule changes and the body has actually shown an increase in performance over the old format type race bodies. Its made to fit all the popular 1/12th chassis with design considerations built in to accommodate the larger brushless motors and lead wires.
This semi-realistic body is pulled in .020 lexan and has a protective film on it.
Features:
- Contemporary LMP styling with slightly larger cockpit
- Fits all EFRA, BRCA, ROAR body rule requirements
Specifications:
- Length: 12.8″ (325mm)
- Width: 6.8″ (173mm)
- Height: 1.9″ (47mm)
- Wheel Base: 7.8″ (198mm)
-
Protoform AMR 1:12 Karosseri Lightweight
Ikke på lager
225 kr NOKOne of the longest running classes in R/C, 1/12th On-Road is still a favorite with racers and enthusiasts the world over. It has continued to evolve and grow in recent years, much to the delight of many. PROTOform has a long history of designing winning bodies for the ultra quick and nimble 1/12th On-Road class – with numerous ROAR Nationals, US Indoor Champs, Snowbird Nationals as well as IFMAR WORLDs titles on its resume.
The AMR-12 has continued the legacy, with an unprecedented 4-straight IFMAR 1:12 World Titles:
- 2010: Naoto Matsukura
- 2012: Naoto Matsukura
- 2014: Marc Rheinard
- 2016: Naoto Matsukura
It’s made to fit all the popular 1/12th chassis with design considerations built in to accommodate the larger brushless motors and lead wires. A decal sheet with headlights to meet new body regulations is also included.
-
Protoform P63 Clear Body 190mm PRO-Lite 0,5mm
Ikke på lager
290 kr NOKThe P63 is the latest aerodynamic solution from PROTOform for the 1:10 touring car class and the year 2022.
This aerodynamic body, with a very high downforce and a low center of gravity, was developed together with professional racers.
It is tailored for today’s insanely fast 190mm touring cars.
The P63 is packed with updated features for outstanding performance on the track and easy installation on any 1/10th scale touring car.Features of the PROTOform P63:
- Radical design with high downforce, sloped hood and forward-mounted cab
- Stiffening hood ribs for low deflection with ultra-light weights
- Recessed trunk section for low center of gravity and added rigidity
- Molded side door panels for increased side bite
- Better airflow behind the bumper for reduced drag
The P63 also offers the easiest assembly of any PROTOform body to date.
PROTOform’s signature mounting markings in the front wheel wells are back, allowing you to choose the position of the body in 2mm increments up to +8mm.
Additionally, there are markings on the hood, tailgate, and rear bumper to easily align the body posts no matter which chassis or rear body post configuration (vertical or horizontal) you prefer.This body conforms to Global Body Spec rules and is made in the USA from high quality, durable polycarbonate.
-
290 kr NOK
The P63 is the latest aerodynamic solution from PROTOform for the 1:10 touring car class and the year 2022.
This aerodynamic body, with a very high downforce and a low center of gravity, was developed together with professional racers.
It is tailored for today’s insanely fast 190mm touring cars.
The P63 is packed with updated features for outstanding performance on the track and easy installation on any 1/10th scale touring car.Features of the PROTOform P63:
- Radical design with high downforce, sloped hood and forward-mounted cab
- Stiffening hood ribs for low deflection with ultra-light weights
- Recessed trunk section for low center of gravity and added rigidity
- Molded side door panels for increased side bite
- Better airflow behind the bumper for reduced drag
The P63 also offers the easiest assembly of any PROTOform body to date.
PROTOform’s signature mounting markings in the front wheel wells are back, allowing you to choose the position of the body in 2mm increments up to +8mm.
Additionally, there are markings on the hood, tailgate, and rear bumper to easily align the body posts no matter which chassis or rear body post configuration (vertical or horizontal) you prefer.This body conforms to Global Body Spec rules and is made in the USA from high quality, durable polycarbonate.
-
-
-
Better Edge Sanding Drum
Ikke på lager
-
Protoform AMR 1:12 Karosseri Pro Lightweight
Ikke på lager
-
Protoform AMR 1:12 Karosseri Lightweight
Ikke på lager
-
Protoform P63 Clear Body 190mm PRO-Lite 0,5mm
Ikke på lager
-
Reservepapir for Sanding Drum
På lager
-
Slipekloss for karrosserier
Ikke på lager