Meny Lukk

Brand: Penguin Bodyshells

  • Penguin CAT L1 Body + Mask
    215 kr NOK

    Penguin Custom Bodyshell for the CAT L1. Manufactured from high quality .75mm lexan. Increased front rake which improves steering response compared to standard kit body. Supplied clear with window masks.

  • Penguin Cougar Laydown Body + Mask
    215 kr NOK

    Penguin Customer Bodyshell for the Cougar Laydown. Manufactured from high quality .75mm lexan. Removed rear bodymount and snug spur fit gives the body a low and sleek look keeping the weight down at the same time. Supplied clear with window masks.

  • Penguin Emperor Wing - 1mm
    80 kr NOK

    From Penguin Custom Bodyshells is their new Emperor Off Road wing.

    Supplied clear in 1mm lexan.

    The rear is sectioned, to allow it to be cut differently, for different conditions and aero effects.

    Has full trim lines for easy cutting.

  • Penguin King Wing - 1mm
    80 kr NOK

    Penguin Custom Bodyshells ‘King Penguin’ wing.

    For 1/10 Off Road Vehicles.

    Different size wings are a useful way of fine tuning any car to the track.

    Overall slightly smaller than the Penguin ‘Emperor’ wing, having raised ridges either side to add durability, and stability on the straights, it has a flat profile across most its length, to aid in down force, and has trim lines on the gurney to enable you to tune for different surfaces. 

    1mm thick, supplied with overspray film.

    Supplied clear, with trim lines to aid cutting.

  • Penguin Laydown Dart Body Clear + Mask
    215 kr NOK

    The new DART Bodyshell for the Cougar Laydown is specifically designed for low profile LiPo’s, ideally 22.5mm and below. 
    The body has a low sleek look and a lower centre of gravity. 

    Includes overspray film, window masks and Penguin decal. 

    Standard weigh version 0.75mm thick.

    (Standard height 25mm LiPo’s will fit under but do touch the body.)

  • Penguin Laydown Dart Lightweight Body + Mask
    215 kr NOK

    The new DART Bodyshell for the Cougar Laydown is specifically designed for low profile LiPo’s, ideally 22.5mm and below. 
    The body has a low sleek look and a lower centre of gravity. 

    Includes overspray film, window masks and Penguin decal. 
    Lightweight version 0.5mm thick.

    (Standard height 25mm LiPo’s will fit under but do touch the body.)

  • Penguin Rockhopper Wing - 1mm
    80 kr NOK

    For competition use, the Rockhopper.  A more traditional style wing that compliments the Penguin range of wings.  The Rockhopper sits between the King (PCB010) and Emperor (PCB007) in terms of downforce.

    It’s made from 1mm lexan and has multiple cut lines on the gurney. 

  • Penguin Vortex CAT L1 Body - 0.5mm
    215 kr NOK

    The ‘Vortex’ has deep ribs down both sides for added stability, which should also increase corner speed.  Combined with the vertical sides it gives it a striking and unique look.

    Great for tuning your CAT L1 to a variety of track conditions.

    Available in standard .75mm and lightweight .5mm, complete with window masks, trim lines and overspray film.

    Supplied clear. 

  • Penguin Vortex CAT L1 Body - 0.75mm
    215 kr NOK

    The ‘Vortex’ has deep ribs down both sides for added stability, which should also increase corner speed.  Combined with the vertical sides it gives it a striking and unique look.

    Great for tuning your CAT L1 to a variety of track conditions.

    Available in standard .75mm and lightweight .5mm, complete with window masks, trim lines and overspray film.

    Supplied clear.